Watch VideoEmployers are required to develop and implement Hazardous Waste Operations (HAZWOPER) training to inform workers (including contractors and subcontractors) performing hazardous waste operations to the level and degree of exposure they are likely to encounter. Training must be conducted initially and annually thereafter.NOTE: This training program consists of four learning modules. To maximize retention of the course material, all four modules must be completed within 365 days of starting the course to receive a certificate of completion.NOTE: This course must be supplemented by an assessment of hands-on performance of work tasks. These are services that TargetSolutions does not provide and should be procured through your management or training coordinator.Course Duration: 2 Hour(s) Each

The purpose of this course is to educate about Asbestos, what it is, where it is commonly found and dangers it can pose. Also covered is what to do if you come in contact with asbestos. This training course has 12 learning modules with a ten-question exam.Course Duration: 1 Hour(s)

The back is the most injury-prone part of the body, but all back injuries are preventable. Back injury incidents rank near the top of all occupational work injuries. These injuries can result in pain, lost work time, inconvenience, and possible disability. This course highlights techniques for protecting and strengthening the back. This training course has 6 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

Backflow is an undesirable flow condition caused by a differential pressure that causes the flow of water and other substances into the distribution pipes of a potable water supply system. This can result in contamination of the potable water supply. Backflow contamination can occur if there are existing cross- connections, back siphonage or backpressure conditions, and unprotected cross-connection or failure of protection devices. Elimination of cross-connections and prevention of backflow is essential to maintaining the safety and health of the water supply.

This course highlights the methods of backflow prevention and describes seven commonly used backflow prevention devices. This course has 14 lessons and a 10-question exam.

Course Duration: 1 Hour(s)

Watch Video

Backflow is an undesirable flow condition caused by a differential pressure that causes the flow of water and other substances into the distribution pipes of a potable water supply system. This can result in contamination of the potable water supply. Backflow contamination can occur if there are existing cross- connections, backsiphonage or backpressure conditions, and unprotected cross-connection or failure of protection devices. Elimination of cross-connections and prevention of backflow is essential to maintaining the safety and health of the water supply.

This course highlights the common conditions that result in backflow, why cross-connection control and backflow prevention are necessary, the indicators of backflow contamination, methods for mitigating backflow events, and the elements of a typical backflow prevention program. This course has 12 modules and a 10-question exam.

Course Duration: 1 Hour(s)

Blood and other potentially infectious materials pose a serious threat to employees who are exposed to these materials. Injuries from contaminated needles and other sharps have been associated with an increased risk of disease from more than 20 infectious agents. The primary agents of concern in current occupational settings are the human immunodeficiency virus (HIV), hepatitis B virus (HBV), and hepatitis C virus (HCV).

This course explains the requirements for complying with this standard as well as provides practical information on the various diseases and protection strategies associated with bloodborne pathogens. The course incorporates the 2001 OSHA revisions to the standard that were made in compliance with the Needlestick Safety and Prevention Act. This training course has 20 learning modules with a ten- question exam.

Course Duration: 1 Hour(s)

Watch Video
In the event of an emergency every second counts. The safe orderly and prompt evacuation or relocation of building occupants depends on good planning and training. The goal of this course is to provide building occupants with information about emergency response plans and procedures in the event of any type of emergency.

Course Duration: 1 Hour(s)

Assembly Bill (AB) 54 is aimed at helping California improve the quality of its drinking water in public water systems, particularly in areas where financial investment is needed. To accomplish this, AB 54 contains a number of new regulations and provisions specifically addressing mutual water companies and Local Agency Formation Commissions or LAFCOs in California. It is important for all mutual water company personnel in California, especially board members, to understand the new provisions and regulations contained in AB-54 and how it may affect their operations and job responsibilities.

This course provides a general overview of AB-54 with an emphasis on its requirements and provisions for mutual water company personnel.

Course Duration: 0.5 Hour(s)

Each year approximately 250,000 people die of sudden cardiac arrest in the United States. Cardiopulmonary resuscitation (CPR) is a combination of rescue breathing and chest compressions delivered to victims thought to be in cardiac arrest. During cardiac arrest, the heart stops pumping blood, blood pressure falls to zero, and the pulse stops. Within 10 seconds a victim may lose consciousness and become unresponsive. CPR helps circulate blood that contains oxygen to the brain and other vital organs and can help "buy time" until help arrives. This course highlights how to recognize the signs of cardiac arrest, how and when to perform CPR, and how to use an AED to help a person in cardiac arrest.

This course is meant to supplement CPR training conducted by the American Heart Association. It is not to be used as the primary guide for patient care. Please contact the American Heart Association for the hands-on class information.

Course Duration: 1 Hour(s)

Watch Video
The primary goal of the water industry is the delivery of potable water reliably and at affordable prices. Coagulation, flocculation, and sedimentation are each processes which can be part of the water treatment process. Some plants use all three steps, some plants use fewer, and some higher technology plants use none. An understanding of these processes is necessary for anyone working in the water industry.

Course Duration: 1 Hour(s)

This module covers the two primary hazards associated with flammable and combustible liquids: explosion and fire. To prevent these hazards, this course and the standard upon which it is based (29 CFR 1910.106), address the primary concerns of design and construction, ventilation, ignition sources, and storage. This training course has 8 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

This course provides the information employees need to handle and transport these potentially volatile storage containers. The program reminds employees to work safely and avoid injuries when handling compressed air and gas. This training course has 9 learning modules with a 10-question exam.

Course Duration: 1 Hour(s)

During the course of employment, you may be exposed to the hazards associated with confined space operations. This course provides awareness level training for activities related to confined space entry. Additional training at your job site is recommended to gain a better understanding of the confined spaces at your place of employment. This training course has 14 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

Every day, hundreds of water main breaks occur throughout North America. Many of these are caused by corrosion. Corrosion can lead to tubercles and scale buildup in pipelines, which can impede the flow of water and damage equipment. Rust and pitting can cause leaks in the system. The cost of repairs and maintenance can strain budgets. Additionally, lead and copper corrosion can also have adverse health effects, and both are regulated by the federal and state governments.

Course Duration: 1 Hour(s)

Watch Video
When disaster strikes, the best protection is knowing what to do. Preparedness is everyone's job. Not just government agencies but all sectors of society -- service providers, businesses, civic and volunteer groups, industry associations and neighborhood associations, as well as every individual citizen -- should plan ahead for disaster.

Course Duration: 1 Hour(s)

This course is designed to provide you with the basic information and safety rules to help you work safely with and around the chemicals that many organizations use in the water disinfection process. This course concentrates on Aqua Ammonia, Sodium Hypochlorite, and Calcium Hypochlorite.

Course Duration: 1 Hour(s)

Watch Video
Water distribution systems are an integral part of keeping the public healthy and safe. The primary purpose of a water distribution system is the delivery of potable water for drinking and firefighting. To meet that goal, systems are designed by civil engineers and city planners to meet the changing needs of homes, offices, and industries. The water operator plays a key role in the installation of these systems.

This course covers the methods of distribution to service customers, the installation of services as well as the maintenance of services. Also covered are the types of customers, metering of these customers and proper records to be kept for service customers.

Course Duration: 1 Hour(s)

Water distribution systems are a vital part of ensuring public health and safety. Their primary purpose of water distribution systems is this delivery of sufficient amounts quantities of potable water at adequate pressure while maintaining state and federal water quality which meets or exceeds State and Federal regulation standards.

While the delivery of drinking water is the most visible part of the distribution system, the system must be built to the higher meet peak hour demands and maximum daily demand, as well as plus fire flow requirements. That firefighting can place upon it firefighting can require twice the pressure or more of normal delivery pressure. To meet these demands goals, systems are designed by engineers who, working closely with water distribution operators. Their job is working closely with city planners, to meet residential and industrial needs while maintaining water quality. This course explores the various materials and equipment utilized in the installation and maintenance of a potable water of clean water distribution systems.

Course Duration: 1 Hour(s)

Traffic accidents are a leading cause of incidental deaths among US workers. This training course presents information to aid employees in operating vehicles safely. This training program has 13 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

Reading a meter is a basic skill every water operator should master. This course covers the proper way to obtain meter readings; including common types of meters, access to meters, how to obtain a direct readout from a meter, and alternative methods of obtaining meter reads.

Course Duration: 1 Hour(s)

Watch Video
This Introductory Guide for First Responders is essential for those employees who may be among the first to arrive at an incident of suspicious origin. It is intended to be a general introduction to the basic concepts for first-responder awareness at the scene of a potential terrorist incident.

NOTE: This training program consists of four learning modules. To maximize retention of the course material, all four modules must be completed within 365 days of starting the course to receive a certificate of completion.

 

Course Duration: 1 Hour(s) Each

The loss of sight can be devastating and is easily preventable. A recent survey found that three out of five workers who suffered an eye injury wore no eye protection. Of those who did, 40% wore the wrong kind. You should wear safety eyewear whenever there is any chance that machines or operations present the hazard of flying objects, chemicals, harmful radiation or a combination of these or other hazards. This course reviews the selection of appropriate eyewear and basic first aid for the eye.

Course Duration: 1 Hour(s)

Each year falls consistently account for the greatest number of fatalities in the construction industry and are a major concern in other industries. Events surrounding these types of accidents often involve a number of factors including unstable working surfaces, misuse of fall protection equipment and human error. Studies have shown that the use of guardrails, fall arrest systems, safety nets, covers and travel restriction systems can prevent many deaths and injuries from falls. This training course has 12 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

Watch Video
Water quality varies from location to location, and the definition of potable water can vary with locality. Most water treatment facilities use filtration as an important step in their water treatment processes, and some smaller municipalities might use a slow sand filtration as their only treatment method.

This course will examine the treatment of water via filtration: what is filtered out of the water we drink, what are the different types of filters available, and how do those filtration methods work? We will also survey the regulatory requirements for potable water as set forth by the EPA, examine some of the most common pollutants, and look at a few case studies regarding specific filtration problems and the unusual solutions that have sometimes been reached.

Course Duration: 1 Hour(s)

Hand portable fire extinguishers are considered the first line of fire defense for fires of limited size. They represent the most portable firefighting equipment available and are used primarily to suppress small, incipient stage, accessible fires before these fires have the opportunity to grow in size and intensity.

Course Duration: 1 Hour(s)

The standards and regulations written by the Occupational Safety and Health Administration (OSHA), and the National Fire Protection Association (NFPA) identify topics that employees must be familiar with in respect to the prevention of fires and what to do when there is a fire.

Supervisors are responsible for providing the information employees need to reduce the risk of fire at work and to know what to do if there is a fire. Fire prevention is the term used to take proactive measures to reduce the potential for a fire to start. Every work place will have varying general and unique elements in their fire prevention plan.

Course Duration: 1 Hour(s)

Watch Video
This course will teach flagger roles and responsibilities for jobs that are close to traffic, which may include streets, highways, or any place with public motorized vehicle access. After its completion, individuals will be knowledgeable in flagging and will be able to recognize and eliminate hazardous conditions that prevent injuries to employees, motorists, and pedestrians, while safely protecting public property.

Course Duration: 1 Hour(s)

Many companies fail to realize that all forklift operators must be trained, authorized and certified per OSHA regulations. Failure to properly train and certify employees involved in forklift operations exposes employers to citations and monetary penalties, as well as an increased exposure to incidents caused by untrained operators. This course introduces basic forklift safety. This training course has 10 learning modules with a 10-question exam.

NOTE: This course must be supplemented by an assessment of hands-on performance of work tasks. These are services that TargetSolutions does not provide and should be procured through your management or training coordinator.

 

Course Duration: 1 Hour(s)

There are many ways to prevent incidents from occurring. Full attention must be given by employees to all aspects of work to prevent injuries and illness from occurring. Having a good understanding of basic construction safety is important. Various areas of construction safety will be covered in each of the following lessons. This training course has 9 learning modules with a 10-question exam.Course Duration: 1 Hour(s)

First aid is the basic medical knowledge that could save a life. The risks involved with daily life may call for immediate action and you may be the only one capable of doing it. First aid will never replace professional medical care, but many injuries will only require first aid care.Part 1 of this course covers basic first aid techniques, including care for childbirth, chest pain, and stroke. It has 14 learning modules with a ten-question exam.Course Duration: 1 Hour(s)

First aid is the basic medical knowledge that could save a life. The risks involved with daily life may call for immediate action and you may be the only one capable of doing it. First aid will never replace professional medical care, but many injuries will only require first aid care.Part 2 covers basic first aid techniques, including care for insect bites, injuries, burns, and poisonings and has 21 learning modules with a 10- question exam.Course Duration: 1 Hour(s)

This course is divided into two key chapters. First, we are going to review some of the most common sources of groundwater contamination. And, in the second half, we are going to review some remediation alternatives to help restore the water quality of the impaired underground water resources.

Through this course, engineers, architects, planners, and contractors will learn about the most common contamination sources and the industry best practices used for groundwater aquifer remediation.

Course Duration: 1 Hour(s)

Untreated or inadequately treated ground water poses a serious problem in public water supply systems. The U.S. Environmental Protection Agency (EPA) has estimated that about 70 percent of ground water systems provide either untreated or inadequately treated ground water. This means that 20 million people receive water that has not been disinfected; 70 million if we include those who receive water that has not been properly treated by log inactivation or removal of viruses. According to the U.S. Centers for Disease Control and Prevention (CDC), ground water is responsible for the majority of waterborne disease outbreaks.

Course Duration: 1 Hour(s)

This course covers what composes a hazardous material and presents the requirements for the general handling, storage and disposal of hazardous materials. It covers what a Safety Data Sheet (SDS) is and how to recognize the information contained in an SDS. It teaches you to recognize the special response procedures necessary to handle hazardous materials spills, covers personal protective equipment and why you'd use it. It also identifies the procedures for cleaning up a hazardous material spill. This training course has 7 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

Preventing spills, fires and explosions of hazardous materials during transportation is a major goal of the U.S. Department of Transportation (DOT). To protect the environment, the public and employees from such incidents, the DOT has developed and adopted rigorous standards for packaging and identifying hazardous materials that are shipped by any mode of transportation.

This module will briefly discuss general DOT classifications and requirements for packaging and shipping hazardous materials. The DOT standards must be followed if you ship hazardous chemicals or samples by any means of transportation. DOT standards must also be followed for any chemical, sample, or hazardous material you may take with you (or check in your baggage) on a flight by scheduled or chartered aircraft. This training course has 14 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

Tools are such a common part of our lives that it is difficult to remember that they may pose hazards. All tools are manufactured with safety in mind but, tragically, a serious incident often occurs before steps are taken to search out and avoid or eliminate tool-related hazards. In the process of removing or avoiding the hazards, workers must learn to recognize the hazards associated with the different types of tools and the safety precautions necessary to prevent those hazards. This training course has 8 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

Noise-induced hearing loss is one of the most common occupational diseases and the second most self- reported occupational illness or injury. The extent of hearing damage depends on the loudness of noise to which you are subjected and the length of time you are exposed. Unprotected, continued exposure to loud noise, defined by OSHA as noise levels over 85 decibels (averaged over an 8-hour time period), can damage the hair cells of the inner ear and result in permanent hearing loss. At these noise levels, a company must have a Hearing Conservation Program.

This course outlines the requirements of a Hearing Conservation Program. This training course has 10 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

This course covers the concepts, calculations, and operational uses of hydraulics in the water industry, and will examine the physics behind certain operations and processes within the water treatment industry. Subjects included are density and specific gravity, pressure and force, head, head loss, pumping rates and pump heads, flow rates, and flow measuring devices.

Course Duration: 1 Hour(s)

Thousands of incidents occur throughout the United States every day. The failure of people, equipment, supplies or surroundings to behave or react as expected, causes most of the incidents. Incident investigations determine how and why these failures occur.

This course introduces techniques for investigating an incident and documenting the results of the investigation. This training course has 7 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

Concerns with Indoor Air Quality (IAQ) have increased since energy conservation measures were instituted in office buildings during the 1970s minimizing the infiltration of outside air and contributing to the buildup of indoor air contaminants. IAQ generally refers to the quality of the air in an office environment. Other terms related to IAQ include Indoor Environmental Quality (IEQ) and "Sick Building Syndrome." This course highlights the causes and effects of poor indoor air quality. This training course has 6 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

Human factors/ergonomics is the study of the interaction of the worker and the job in an effort to minimize physical and psychological stress in the workplace.

It applies information regarding worker's capacities and capabilities to the design of jobs, products, workplaces and equipment. This course introduces the general principles of occupational ergonomics, as well as how to prevent repetitive stress injuries and how to recognize the warning signs of RSIs. This training course has 9 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

Recognizing the unique characteristics of the laboratory workplace, OSHA tailored a standard for occupational exposure to hazardous chemicals in laboratories. This course describes the requirements of the Occupational Exposure to Hazardous Chemicals in Laboratories, including the written chemical hygiene plan to ensure employees are protected from all potentially hazardous chemicals in use in their work areas. This training course has 14 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

This course covers the activities related to ladders and scaffolding and provides basic safety instructions to protect workers from the hazards associated with ladders and scaffolding. Construction of all ladders and scaffolds should conform to the provisions of the applicable state, provincial or local codes, whichever are most restrictive. Special-use climbing equipment, such as a combination stepladder-work platform, also must comply with the applicable codes.

Course Duration: 1 Hour(s)

Lasers are used every day. They are used in grocery store scanners, auto repair shops for alignments and laser-point pens. Lasers have made it easier for employees to track inventory, conduct research and enhance presentations. They have become common in the workplace and are used in research, medical and other industries. Most lasers are capable of causing eye injury to anyone who looks directly into the beam or through reflective conditions.

This course will introduce you to the basic hazards involved with using lasers and how to prevent potential injuries. This training course has 10 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

Lead overexposure is a leading cause of workplace illness. This course will cover background information about lead and its uses in buildings, health effects, regulations and respiratory protection. This training course has 12 learning modules with a 10-question exam.

Course Duration: 1 Hour(s)

Watch Video
Potential lead contamination from drinking water presents a significant health risk. Notable examples of lead contamination include a crisis in Flint, Michigan, a city that, for a variety of reasons, failed to protect its citizens from the dangers of this toxin. Other examples are reported far too regularly. Such an example includes an EPA report that approximately 350 schools and day-care centers across the nation failed 470 lead tests between 2012 and 2015.

Even more disturbing was a change in Washington, DC water system disinfection methods that caused a spike in lead levels to thousands of homes a result that was kept hidden from residents for three years. Another example includes Sebring, Ohio schools, where officials shut down water fountains due to elevated lead levels.

Course Duration: 1 Hour(s)

Lock-out/tag-out procedures safeguard employees from hazardous energy while they are performing service or maintenance on machines and equipment. The procedures necessary to shut down and lock- out or tag-out machines and equipment require that employees receive training, conduct periodic inspections and maintain the energy control program. This training course has 9 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

Employees who do not have a basic understanding of electrical safety are often exposed to dangers associated with hazardous energy sources. In addition, the servicing and maintenance of equipment may expose employees to these hazardous energy sources. Annual electrical safety training will help prevent an electrical accident from happening at your workplace.

Course Duration: 1 Hour(s)

Crushed hands and arms, severed fingers and blindness are just some of the possible machinery-related injuries. There are many hazards created by moving machine parts. Machine guarding and training are essential for protecting workers from needless and preventable injuries. This training course has 9 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

More employees are injured in industry while moving materials than while performing any other single function. In every day operations, workers handle, transport and, store materials. They may do so by hand, by manually operated materials handling equipment, or by power operated equipment.

This course highlights basic warehouse safety to prevent employee injury. This training course has 11 learning modules and a 10-question exam.

Course Duration: 1 Hour(s)

Watch Video
For almost every job within any technical area of public service or general public works, there is a requirement for an understanding of basic mathematics and how to apply such concepts. Within the water industry there are necessary mathematics calculations that must be successfully mastered for the safety and health of the public who utilize domestic and industrial water systems.

This course covers beginning applied mathematics as used in the water supply industry. It is structured for beginning-level operators or those who have not had recent experience with mathematics in their jobs. Subjects covered in this course are: average daily flow, overflow rate, filter loading rate, detention time, and well operation calculations.

Course Duration: 1 Hour(s)

Water operators must master basic math skills to perform the more advanced calculations required day- to-day on the job.

This course covers basic mathematical notation, methods, and calculations. Included in the course are powers and scientific notation, dimensional analysis, rounding and estimation, solving for the unknown value, ratios and proportions, percent, averages, linear area and volume measurements, and conversions.

Course Duration: 1 Hour(s)

The purpose of PPE is to shield or isolate individuals from the chemical, physical and biological hazards that may be encountered. This course describes the different types of PPE, as well as how to select and maintain PPE. This training course has 15 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

This training course was designed to provide managers and employees with basic concepts of radiation and radiation protection. At your job site, part of your job may be to protect people's health and the environment from harmful exposure to radiation. This training course has 10 learning modules with a ten-question exam.

Course Duration: 1 Hour(s)

Watch Video
Water distribution renewal methods can be divided into three overall categories. They include pipe repair, rehabilitation and replacement. There is some obvious overlap between the technologies used on these three methods, such as the case of sliplining as it can be used for spot repairs and for entire system rehabilitation. The applications of the different technologies will vary per the specifics on each project. However, please note that any systems used need to be approved by the NSF/ANSI 61 standard for use in water distribution project.

At the end of this course Contractors, Engineers, Water System Operators and Architects will be able to identify technologies that are used to repair, rehabilitate and replace aging water distribution systems.

Course Duration: 1 Hour(s)